Help Did not see a list, What are some of your favorite IPTV services but are hard to find?

[nakedshorts]

Trying to see some peoples favorites since I can not find my favorites any longer. I am getting tired of trying out hundreds of codes for them to fall short for what I am looking far.

My all time favorites are

1.

You need to be registered to see the hidden links

or

You need to be registered to see the hidden links

(changed multiple times) I keep searching multiple places, but can not find any working codes any longer (has great 24/7 tv shows with tons of 80's classics with the Guy Ritchie channel and decent porn channels)

2.

You need to be registered to see the hidden links

Still have a working one, but scared it will stop working soon as it been up for close to a year. Have not found another code for this in 8 months or so. (good 24/7 channels, good movie section with new theater cams, good tv section and of course good porn section that gets updated almost monthly)

I could use a Open or silver bullet config for these if possible that way I can run continuous searches for these. I would even take a sentry2 config.

Are there any better than these 2, that I should be on the lookout for? What are some of your favorites that you continue to search for?

 

[PicKim]

@nakedshorts

I did a quick scan on the second URL, found 2.
I haven't tried them, you do it.

For the first URL you put I should change my "config" for Open Bullet as it is a "portalstb" otherwise you can try with a scanner written in python, almost everyone in the scan options has that type of portal.

As soon as I can I'll do a more intense scan on the second URL

Greetings

 

[nakedshorts]

yessssssssssss thank you very much, I need to learn how to scan these. Can not believe you found them so fast, I been looking for months. the 1st link is blocked but 2nd works fine. The ky-iptv link changed multiple times over the last few years, very hard to find any working ones now. the last working ones I have are

You need to be registered to see the hidden links

You need to be registered to see the hidden links

You need to be registered to see the hidden links

or the

You need to be registered to see the hidden links

or

You need to be registered to see the hidden links

I have been messing with openbullet and sentry for a few years (not good at it but can get a few porn passes every now and then) but new to IPTV scanning, I just heard of python so have to start learning that. Do I set it up somewhat close to openbullet with macs being the combos? I just do not understand where you enter the link or portal you want to scan for example livein1, I am just stunned how fast you found it, when I been looking for those passes for many many many months with no luck. The livein1 i been using has been close to a year. I had found and used 20 or so ky-iptv over the last 2 years but they are very hard to find now (for me anyway) I need to learn to scan myself

 

[PicKim]

yessssssssssss thank you very much, I need to learn how to scan these. Can not believe you found them so fast, I been looking for months. the 1st link is blocked but 2nd works fine. The ky-iptv link changed multiple times over the last few years, very hard to find any working ones now. the last working ones I have are

You need to be registered to see the hidden links

You need to be registered to see the hidden links

You need to be registered to see the hidden links

or the

You need to be registered to see the hidden links

or

You need to be registered to see the hidden links

I have been messing with openbullet and sentry for a few years (not good at it but can get a few porn passes every now and then) but new to IPTV scanning, I just heard of python so have to start learning that. Do I set it up somewhat close to openbullet with macs being the combos? I just do not understand where you enter the link or portal you want to scan for example livein1, I am just stunned how fast you found it, when I been looking for those passes for many many many months with no luck. The livein1 i been using has been close to a year. I had found and used 20 or so ky-iptv over the last 2 years but they are very hard to find now (for me anyway) I need to learn to scan myself

The python script I posted after the first submission asks you to enter the portal and the door; if you have made a copy of the portal you can use the right mouse button and it will automatically paste the portal.

You have to practice in the field, Python scripts are simple to use but have limitations... they're fine to start with.

 

[dav]

The python script I posted after the first submission asks you to enter the portal and the door; if you have made a copy of the portal you can use the right mouse button and it will automatically paste the portal.

You have to practice in the field, Python scripts are simple to use but have limitations... they're fine to start with.

sir, what do you suggest is the best for scanning portals since you are saying python scripts are only for beginners and have limits?

 

[PicKim]

"Open Bullet" 1 or 2 with a good "config" with proxies enabled is the best solution.

Greetings

 

[dav]

"Open Bullet" 1 or 2 with a good "config" with proxies enabled is the best solution.

Greetings

thanks pickim for answering...the problem with openbullet is that it's hard to find a working config.

 

[PicKim]

thanks pickim for answering...the problem with openbullet is that it's hard to find a working config.

Search carefully on the forum, for example, recently the user "THEHUNTER" posted a package with several "configs". Also read the "openbullet beginner" post in the "Beginners Zone" section. Read everything to get an idea on how to set certain things...

Greetings

 

[dav]

Search carefully on the forum, for example, recently the user "THEHUNTER" posted a package with several "configs". Also read the "openbullet beginner" post in the "Beginners Zone" section. Read everything to get an idea on how to set certain things...

Greetings

thanks again pickim. I already read the post for beginners and tried the hunter recent config pack and got not a single hit even on easy portals . I'm not saying his configs aren't working cause maybe i've done sth wrong. so if you can help, here are the questions I have no answers to :
- Should I always use proxies? if yes what are the best, http, sock4 or socks5?
-Should I always use a vpn? if yes which location to use to get hits?
-Finally, can you share with me the environement.ini you use ? cause I have many but don't know which is the correct one and sometimes openbullet refuses to launch when modifying or replacing it.
Have a nice day sir.

 

[PicKim]

thanks again pickim. I already read the post for beginners and tried the hunter recent config pack and got not a single hit even on easy portals . I'm not saying his configs aren't working cause maybe i've done sth wrong. so if you can help, here are the questions I have no answers to :
- Should I always use proxies? if yes what are the best, http, sock4 or socks5?
-Should I always use a vpn? if yes which location to use to get hits?
-Finally, can you share with me the environement.ini you use ? cause I have many but don't know which is the correct one and sometimes openbullet refuses to launch when modifying or replacing it.
Have a nice day sir.

PROXY: I use them, the best are the ones you pay for... if like me you don't want to pay for them then you have to work a little harder; you will have to download tools dedicated to "scraping" proxies (there are many on the web) I also put a tool on the forum, or while browsing the web in the search type free proxy, or proxy list, etc...

Another method that can be used is the rotation of proxies in O.B. via API (I wrote a tutorial for this method) I don't know if API urls still work but the tutorial gives you an idea on how to set up O.B.
This method has pros and cons if you read the tutorial it is explained.

Once the proxies have been found, a check must be done to see if they still work or if they work from your country. You need another tool to check the proxies or you can use the check integrated in O.B. (change the judge for proxies, google is too restrictive).

I use all 3 types of http/https proxies, socks4, socks5 as a level I use L1 and L2 I DO NOT use L3 (transparent)

I change the proxies every 3/4 days, still checking on the old ones... for scanning I use around 900 to 1100 with 100 bots.
A few times I took a screenshot on O.B. in my scans, you can see there or in my media.
If you don't use proxies keep the bots low, 3/4 otherwise after a while the server closes due to excessive requests or the anti-flood triggers.

VPN: If you use proxies you don't need VPN to scan.

FILE: Copy this and paste it into the O.B.1 environment.ini file (at the beginning).

Please, Log in or Register to view codes content!

Simulate a scan on a panel with many MACs... you can see here on the forum or go to my page, find a MAC and add it to your MAC combos (maybe at the beginning so you don't have to wait at the end of the scan if it detects the MAC) another method is "debug mode" but that's another story.

Greetings

 

[dav]

PROXY: I use them, the best are the ones you pay for... if like me you don't want to pay for them then you have to work a little harder; you will have to download tools dedicated to "scraping" proxies (there are many on the web) I also put a tool on the forum, or while browsing the web in the search type free proxy, or proxy list, etc...

Another method that can be used is the rotation of proxies in O.B. via API (I wrote a tutorial for this method) I don't know if API urls still work but the tutorial gives you an idea on how to set up O.B.
This method has pros and cons if you read the tutorial it is explained.

Once the proxies have been found, a check must be done to see if they still work or if they work from your country. You need another tool to check the proxies or you can use the check integrated in O.B. (change the judge for proxies, google is too restrictive).

I use all 3 types of http/https proxies, socks4, socks5 as a level I use L1 and L2 I DO NOT use L3 (transparent)

I change the proxies every 3/4 days, still checking on the old ones... for scanning I use around 900 to 1100 with 100 bots.
A few times I took a screenshot on O.B. in my scans, you can see there or in my media.
If you don't use proxies keep the bots low, 3/4 otherwise after a while the server closes due to excessive requests or the anti-flood triggers.

VPN: If you use proxies you don't need VPN to scan.

FILE: Copy this and paste it into the O.B.1 environment.ini file (at the beginning).

Please, Log in or Register to view codes content!

Simulate a scan on a panel with many MACs... you can see here on the forum or go to my page, find a MAC and add it to your MAC combos (maybe at the beginning so you don't have to wait at the end of the scan if it detects the MAC) another method is "debug mode" but that's another story.

Greetings

you're a true boss. Thanks a million times bro.

 

[dav]

PROXY: I use them, the best are the ones you pay for... if like me you don't want to pay for them then you have to work a little harder; you will have to download tools dedicated to "scraping" proxies (there are many on the web) I also put a tool on the forum, or while browsing the web in the search type free proxy, or proxy list, etc...

Another method that can be used is the rotation of proxies in O.B. via API (I wrote a tutorial for this method) I don't know if API urls still work but the tutorial gives you an idea on how to set up O.B.
This method has pros and cons if you read the tutorial it is explained.

Once the proxies have been found, a check must be done to see if they still work or if they work from your country. You need another tool to check the proxies or you can use the check integrated in O.B. (change the judge for proxies, google is too restrictive).

I use all 3 types of http/https proxies, socks4, socks5 as a level I use L1 and L2 I DO NOT use L3 (transparent)

I change the proxies every 3/4 days, still checking on the old ones... for scanning I use around 900 to 1100 with 100 bots.
A few times I took a screenshot on O.B. in my scans, you can see there or in my media.
If you don't use proxies keep the bots low, 3/4 otherwise after a while the server closes due to excessive requests or the anti-flood triggers.

VPN: If you use proxies you don't need VPN to scan.

FILE: Copy this and paste it into the O.B.1 environment.ini file (at the beginning).

Please, Log in or Register to view codes content!

Simulate a scan on a panel with many MACs... you can see here on the forum or go to my page, find a MAC and add it to your MAC combos (maybe at the beginning so you don't have to wait at the end of the scan if it detects the MAC) another method is "debug mode" but that's another story.

Greetings

sorry to bother bro I followed your advice and here what I did:
I tested thehunter configs in ob v1.2.2 with:
-Macs wordlist type in the evironement.ini
-tested (working) http, sock4, sock5 (without vpn)
-with vpn
-without vpn and without proxies
-with a valid (or without) mac inserted in different sizes combos
but not a single hit. Strange!!! whereas with python scripts I often get many with vpn because as you said py scripts dont work well with proxies.
Am I missing something or is it that the configs don't work?

 

[PicKim]

sorry to bother bro I followed your advice and here what I did:
I tested thehunter configs in ob v1.2.2 with:
-Macs wordlist type in the evironement.ini
-tested (working) http, sock4, sock5 (without vpn)
-with vpn
-without vpn and without proxies
-with a valid (or without) mac inserted in different sizes combos
but not a single hit. Strange!!! whereas with python scripts I often get many with vpn because as you said py scripts dont work well with proxies.
Am I missing something or is it that the configs don't work?

Which "config" do you use from the package?

 

[dav]

you're a true boss, thanks a million times bro.