Tutorial openbullet beginner

[axapay1]

i downloaded some configs for OB2 . Its an opk file . May i know how do i open it and how do i edit the file to scan for mac or m3u ?

 

[axapay1]

i downloaded some configs for OB2 . Its an opk file . May i know how do i open it and how do i edit the file to scan for mac or m3u ?

Some one please help answer this please.

 

[PicKim]

Some one please help answer this please.

Why do you want to open the .opk file? load the config on O.B.2, go to the config menu double click on the config and you are in the debugger menu, if the config was created in .loli you can see, if it was created in C# no.

 

[braveheart2728]

Why do you want to open the .opk file? load the config on O.B.2, go to the config menu double click on the config and you are in the debugger menu, if the config was created in .loli you can see, if it was created in C# no.

alright, now I understood why were some configs showing blank

 

[braveheart2728]

It works now all good and I got hits on Openbullet1, All thanks goes to @PicKim who helped me and is actually helping everyone

 

[axapay1]

It works now all good and I got hits on Openbullet1, All thanks goes to @PicKim who helped me and is actually helping everyone

Hi bro can please tech me how to scan ? Share your config with me please. Tell me what i need to change inside the config file. Thanks

 

[braveheart2728]

Hi bro can please tech me how to scan ? Share your config with me please. Tell me what i need to change inside the config file. Thanks

Hi man, I don't know what makes you think that I can explain you regarding Openbullet while I'm very noob in this field and hardly succeeded to get a config to work after being assisted myself so much, but I'll do my best according to what I know:
1- you need 3 main important things :
A- Combo file which is a text file either with MAC addresses (if you'll scan for MAC) or with user password (if you'll scan for M3U , and you need to put them in the folder inside Openbullet called wordlist
B- Config file ( should be working to get you what you need MAC or M3U and some Configs can get you both)
C- Proxies ( you can try at the beginning without proxy but if you'll use them, should be fresh and tested to be working which you can test in Openbullet program itself but if you use whatever proxy without test, will be so much worse than proxy less )

Also if you go through all this post you'll get more info.

Regarding the Configs I have and I tested and are working, will share them in forums.

 

[braveheart2728]

Hi man, I don't know what makes you think that I can explain you regarding Openbullet while I'm very noob in this field and hardly succeeded to get a config to work after being assisted myself so much, but I'll do my best according to what I know:
1- you need 3 main important things :
A- Combo file which is a text file either with MAC addresses (if you'll scan for MAC) or with user password (if you'll scan for M3U , and you need to put them in the folder inside Openbullet called wordlist
B- Config file ( should be working to get you what you need MAC or M3U and some Configs can get you both)
C- Proxies ( you can try at the beginning without proxy but if you'll use them, should be fresh and tested to be working which you can test in Openbullet program itself but if you use whatever proxy without test, will be so much worse than proxy less )

Also if you go through all this post you'll get more info.

Regarding the Configs I have and I tested and are working, will share them in forums.

to don't forget, before all this you need to add these codes in the file (environment) to can scan for MAC at the first place

Please, Log in or Register to view codes content!

 

[braveheart2728]

I have a new beginner's issue I'm now using Silverbullet Pro 1.4 , I have gone through many piles of configs to get those which are working and I have some Configs that are working and having hits.
The problem is the hit info is mainly just the panel address and the MAC and sometimes m3u (which is not actually interesting me) but is not getting device id neither Serial.
The question is : is that something which can be fixed by adding some codes in the config ?

 

[PicKim]

@braveheart2728

In short..."Encryption"
The S/N is obtained from the MAC via the MD5 hash function producing a 128bit output.

For Device 1, Device 2 and Signature it is always obtained from the MAC through the SHA256 function producing a 256bit output.

It is not a single string of code, then it depends if you want to shorten (CUT) the above mentioned Devices etc. to 13 alphanumerics... you have to make other strings of code.

 

[braveheart2728]

@braveheart2728

In short..."Encryption"
The S/N is obtained from the MAC via the MD5 hash function producing a 128bit output.

For Device 1, Device 2 and Signature it is always obtained from the MAC through the SHA256 function producing a 256bit output.

It is not a single string of code, then it depends if you want to shorten (CUT) the above mentioned Devices etc. to 13 alphanumerics... you have to make other strings of code.

I understood this fully @PicKim moreover now after I gone through some loli scrips and compare them to stacker blocks, I also saw a video about transforming a loli config to OPK and I applied and made one opk config (very bare bone one just capturing mac ) and I tested and was working then I change something not sure what and it stopped to work (I think I can do it again)
I tried to do this with loli configs that are more sophisticated but no success (I need more knowledge, and I don't know from where to start, should I start from C# learning !! I don't find something good to explain about OB 2 stacker blocks)

Another thing I'm not sure how is being done is, I saw some configs that captures these info (device id 1 and 2 plus signature ...) but they don't append them in the hits file , I think is just required to add them in the append lines block in stacker !! not sure and didn't check that yet.

 

[braveheart2728]

I understood this fully @PicKim moreover now after I gone through some loli scrips and compare them to stacker blocks, I also saw a video about transforming a loli config to OPK and I applied and made one opk config (very bare bone one just capturing mac ) and I tested and was working then I change something not sure what and it stopped to work (I think I can do it again)
I tried to do this with loli configs that are more sophisticated but no success (I need more knowledge, and I don't know from where to start, should I start from C# learning !! I don't find something good to explain about OB 2 stacker blocks)

Another thing I'm not sure how is being done is, I saw some configs that captures these info (device id 1 and 2 plus signature ...) but they don't append them in the hits file , I think is just required to add them in the append lines block in stacker !! not sure and didn't check that yet.

one of the problems I faced when I tried to transform loli configs into OPK is , I was following exactly the script block by block and test to make sure is no mistakes , but I had one common error that made me to don't continue ( example the scrip starts by hits then http request and it goes ok no error then oops error that MAC is not identified in the context or token is not while they are mentioned just in http request headers) so let me just ask, if I complete to then end of the script , this particular error will disappear ? or definitely I made a mistake and it has nothing to do with the script context ?

 

[PicKim]

one of the problems I faced when I tried to transform loli configs into OPK is , I was following exactly the script block by block and test to make sure is no mistakes , but I had one common error that made me to don't continue ( example the scrip starts by hits then http request and it goes ok no error then oops error that MAC is not identified in the context or token is not while they are mentioned just in http request headers) so let me just ask, if I complete to then end of the script , this particular error will disappear ? or definitely I made a mistake and it has nothing to do with the script context ?

If the requests go well then yours is a "KEY CHECK" problem then it depends on how many checks you place, for example I have 2, one on the token and one on the MAC.

It was the "config" problem that I corrected, copy the two "KEY CHECK" from there

Greetings

 

[braveheart2728]

If the requests go well then yours is a "KEY CHECK" problem then it depends on how many checks you place, for example I have 2, one on the token and one on the MAC.

It was the "config" problem that I corrected, copy the two "KEY CHECK" from there

Greetings

I have this error

Please, Log in or Register to view codes content!

Indeed is nothing in stacker blocks called Cookie or Cookie2 // it's no where except in HTTP request under headers

How to debug this error?

 

[PicKim]

I have this error

Please, Log in or Register to view codes content!

Indeed is nothing in stacker blocks called Cookie or Cookie2 // it's no where except in HTTP request under headers

How to debug this error?

Upon what request does he give it to you? on the first request?
have you tried take it off? maybe they are old...

Greetings

 

[braveheart2728]

Upon what request does he give it to you? on the first request?
have you tried take it off? maybe they are old...

Greetings

It's in "2" HTTP requests under headers, Yes I tried to remove it from both blocks, It works but I get result as failed. I think there's another mistake in the blocks info I entered. will try to figure it out. thank you for the response, you confirmed that I can remove it.

 

[Baabe]

Thanks for this great thread.
For me it is the best scanning tutorial i have ever read. Learned a lot and OB2 is finally running well!

 

[donisantoso]

ASK:
is there any OB1 config for scanning HTTPS M3U server?
I have m3u config that is working for HTTP server but it wouldn't work if the server protocol is HTTPS. TIA for guiding me to solve this problem.

 

[PicKim]

ASK:
is there any OB1 config for scanning HTTPS M3U server?
I have m3u config that is working for HTTP server but it wouldn't work if the server protocol is HTTPS. TIA for guiding me to solve this problem.

Try it anyway even if you find URLs with https... it works with the MAC scan.

Possibly you can try adding the final "s" in the config; example from http to https throughout the config.

Save the original config first.

Greetings

 

[donisantoso]

Try it anyway even if you find URLs with https... it works with the MAC scan.

Possibly you can try adding the final "s" in the config; example from http to https throughout the config.

Save the original config first.

Greetings

as you said, i tried to change the config and viola, it's working. thank you once again for your help sir. you're the best..

 

[PicKim]

@cookysnack

It doesn't work for you because a variable was NOT made on the URL.
The "config" if you notice has the fixed URL which is

You need to be registered to see the hidden links

.

Now if you want to use this "config" every time you have to edit the URL manually and enter the URL you want to scan, deleting the previous URL from time to time.

Look carefully because there won't be just one string that has the URL... you have to use "replace" with notepad in order to have all the request strings the same.

Otherwise try looking here:

You need to be registered to see the hidden links

Best regards